Proud Owner Of A New Owens Corning Onyx Black Roofing System
This project had difficulties, but no challenge was too great for our company.
Always hire a professional roofer to do your roof
Table of contents
- holes and huge gaps in roof decking
- Make shift pipe boots?
- aluminum flashing off roof
- straight shingle rows
- Straight ridge cap and nails are perfect
- new drip edge all the way around the house
- New vents and pipe boots
- Customer testimonial
- 1holes and huge gaps in roof decking
There are lots of large holes and 4-inch gaps in the decking that run the length of the house. As you can see, they covered these gaps and holes with very thin aluminum flashing.
Go To Pin - 2Make shift pipe boots?
In this picture, they used an extra shingle as a pipe boot, then caulked it to the shingle.
Go To Pin - 3aluminum flashing off roof
Here you can see the aluminum flashing is off the roof, and the holes and extensive gaps are exposed. Arrows on top pointing down show the large gap in the decking that runs the length of the house. The arrows from the bottom show black decking that has been spray-painted (I believe they used old leftover decking for the roof even if it had holes), while the random arrows pointing up show the random holes in the decking.
Go To Pin - 4straight shingle rows
As you can see, this is a pretty long home. And the longer the house, the more difficult it becomes to keep your rows straight, which are very straight.
Go To Pin - 5Straight ridge cap and nails are perfect
As you can see, the ridge cap is as straight as the ridge of the house, and all the nails in the ridge cap shingles and nailed just behind the tar line.
Go To Pin - 6new drip edge all the way around the house
Go To Pin - 7New vents and pipe boots
Go To Pin - 8Customer testimonial
Another very happy Litespeed customer.
Go To Pin